Degradation Study of Biobased Polyester–Polyurethane and its Nanocomposite Under Natural Soil Burial,UV Radiation and Hydrolytic-Salt Water Circumstances

The current study focuses on the development of a formulation of polyester polyurethane (PEPU) samples using castor oil (CO) modified polyester polyol and partially biobased aliphatic isocyanate. The CO modified polyester polyol was synthesized employing transesterification reaction between CO and diethylene glycol in the presence litharge (PbO) catalyst. Subsequently, the modification of CO was confirmed using proton nuclear magnetic resonance (¹HNMR) spectra analysis. In the next stage, the biobased polyester polyurethane nanocomposites (PEPUNC) were prepared by incorporating 3 wt% OMMT nanoclay within PEPU through in situ polymerization technique. The produced PEPU was confirmed by Fourier transform infrared spectroscopy (FTIR) and ¹HNMR spectra analysis. Further, the degradation properties of developed PEPU subjected to soil-burial, UV exposure and hydrolytic-salt water medium were noted by FTIR spectroscopy. Corresponding weight loss, mechanical measurements and morphological studies through scanning electron microscopy (SEM) analysis were studied. The results showed that the addition of OMMT nanoclay within the PEPU matrix produces significant improvement in the degradation rate which indicated the susceptibility of OMMT nanoclay to humidity upon exposure to soil burial. The produced microorganisms from the soil resulted in significant chemical and morphological changes in the entire structure of the PEPU. Additionally, the highest degradation and percentage of weight loss was observed under soil burial as compared to UV exposure and hydrolytic-salt water medium.     

Structural alterations in compound eye of Drosophila melanogaster in response to sodium fluoride treatment

Sodium fluoride, used as a pesticide in agriculture, is also an ingredient of toothpastes which help to fight dental problems. In this study, Drosophila melanogaster, a non-target organism, is used to explore morphological changes in the adult compound eye as a function of exposure to fluoride at 20, 40, 80, 100 and 150 mg L^?1, using scanning electron microscopy. The experimental concentrations were much lower than the ones used in the studies of the British Association of Community Dentistry. Distinct morphological alterations in the eye of the treated insects revealed ommatidial ridges and disoriented mechanosensory bristles which were most prominent in the 40 and 80 mg L^?1 treatment groups. Since humans and Drosophila share homology in many genes that are involved in developmental pathways, the present findings raise concern on the use of sodium fluoride as a pesticide.     

Sustainable Waste Management of Engineering Plastics Generated from E-Waste: A Critical Evaluation of Mechanical,Thermal and Morphological Properties

Journal of Polymers and the Environment - The major roadblock for recycling of waste electrical and electronic equipments (WEEE) depends on the viability of sorting process, which is a complex...     

The quandary of local people—Park relations in Nepal's Royal Chitwan National Park

This paper analyzes five major causes of park-people conflicts that have occurred in Nepal's Royal Chitwan National Park. The causes include illegal transactions of forest products from the park, livestock grazing in the park, illegal hunting and fishing, crop damage, and threats to human and animal life caused by wild animals from the park. The conflicts indicate a reciprocal relationship between the park and local people. They reflect the attitudes of local people and representatives of the park authority whose priorities and objectives largely diverge. The results show that people settled adjacent to the park are heavily dependent on its resources. Even in places where some, albeit few alternative sources exist, local people continue to trespass the park boundary as these sources are inadequate to ensure the fulfillment of local people's resource needs. Illegal transactions of resources continue throughout the year; however, they are less intense during summer due to flooding caused by the Rapti River, which forms the park boundary towards the northern section where this study is conducted. The frequency of local people's visits to the park is mainly determined by their age, distance between homesteads and park, and volume of crop loss caused by wild animals. Crop damage is the function of size of landholding, distance, and frequency of crop raid. Local people claim that they have no intention of letting their livestock graze in the park; however, the dense vegetation of the park attracts livestock grazing on riverbanks just outside the open park boundary. Many head of livestock are killed by carnivores of the park. Human casualties are mainly caused by sloth bear (Melursus ursinus), tiger (Panthera tigris), wild pig (Sug scrofa), and rhinoceros (Rhinoceros unicornis). There had been some earlier attempts to reconcile the conflicts by offering local people different kinds of compensations; however, these were unsuccessful measures. An integrated approach is essential if efforts to resolve the park-people conflicts are to succeed. The government is in the process of launching a project that aims to resolve the inherent problems with such an approach. Suggestions are made to incorporate some key elements, such as maintaining effective communication between various parties and the potential for wildlife conservation among local people.     

Ecofriendly approach of urban solid waste management: a case study of Jalgaon city, Maharashtra

In India, the traditional methods are used for urban solid waste management. These practices are associated with degradation of the urban environment Hence, an environmentally sound garbage management system is required for the urban waste management. The concept of waste minimization needs to be adopted in such systems. It is possible to implement certain corrective measures at collection, storage, transport and disposal of urban solid waste to minimize the adverse impacts on the environment The present investigations are emphasized on generation, characterzation and ecofriendly disposal of solid waste generated in Jalgaon city, Maharashtra. In the present study the waste generation at source was studied in the various income groups of the city. The per capita waste generation was studied by sampling the waste directly from the source of generation. The study reveals that the waste generation is large in the high-income group followed by middle and low-income group public. Further the physicochemical characterization of the waste was also studied. The data generated will help to develop environmentally sound and economically feasible solid waste management system for Ihe city.     

Complex dynamics of toxin producing algal species and primary productivity in two water ponds of Faizabad

In order to develop a method of predicting and assessing pond eutrophication, which is a serious environmental problem, and to propose effective measure of improvement of water quality. The present study was performed to measure water quality variables, primary productivity, chl-a and biomass of toxin producing algal species and fish production. High nutrient influx and toxin producing algal species have been observed during June 1999 to May 2000 in two water bodies [Girija Kund (A) and Maqubara pond (B)] of Faizabad. The maximum chl-a concentration, toxins producing algal species biomass were found to be 415.00 and 515.00 in pond A, while 451.00 microg/l and 541.22 mg/l in pond B, respectively in the case of Microcystis aeruginosa. Ecological parameters to evaluate GPP, NPP and CR were found to be 297.00, 134.000 and 182.00 mgCm3/h in summer season in pond B, respectively which is higher than pond A. A poor association existed between chl-a and GPP. Temporal variation (Photosynthetic rate) in A(max) & P(max) was also observed to evaluate the productivity of pond. Annual fish production potential of the ponds A and B has been estimated to be around 342.00 Kg and 204. 00 Kg, respectively which may be due to the presence of toxin producing algal species.     

Distribution of heavy metals in sediment and water of river Gomti

Gomti river receives industrial as well as domestic wastes from various drains of Lucknow city. In the process the water and sediment of the river Gomti get contaminated with heavy metals and other pollutants. In the present study, impacts of domestic/industrial wastes on the water and sediment chemistry of river Gomti with special reference to heavy metals have been investigated in different seasons (summer, winter and rainy). For this, seven sampling sites: Gaughat, Mohan Meakin, Martyrs Memorial, Hanuman Setu, Nishatganj bridge, Pipraghat and Malhaur, in the river Gomti in Lucknow region were identified and samples of water and sediments were collected in all the three seasons. In the collected water and sediment samples, six metals (Cd, Cr, Cu, Ni, Pb, and Zn) were analyzed on ICP-AES (Inductively coupled plasma emission spectroscopy) Labtam Plasmalab 8440. High concentrations of all the metals were noticed in water and sediment in rainy season compared to summer and winter. Because in rainy season runoff from open contaminated sites, agricultural field and industries, directly comes into the river without any treatment. In both the cases, the concentration of zinc was maximum (0.091 g/ml in water and 182.13 g/g in sediment) and the concentration of cadmium (0.001 g/ml in water and 17.26 g/g in sediment) was minimum. Higher concentration of metal in water and sediment during rainy season could be due to the industrial/agricultural/domestic runoff coming into the river.     

Municipal landfills exhale newly formed organotins

For the first time we are able to report the identification and quantification of several unexpected alkylated tin compounds such as dimethyldiethyltin, trimethylethyltin and propyltrimethyltin in European municipal waste deposits, by using GC-ICP-MS. Future studies will reveal whether their origin is from the degradation of butyl-, or octyltin compounds or simply products of de novo synthesis within the landfill environment.     

Bricks as historical record of heavy metals fallout: Study on copper accumulation in Agra soils since 1910

Peat, ice deposits and aquatic sediments, which have been used as a geochemical monitor of atmospheric heavy metal pollution until now, are open and dynamic systems and can be easily affected by climatic variations. In contrast, bricks, which are more compact, can act as a better geochemical monitor. Analysis of Cu, Cr, Ni, Pb and Zn in scores of soil and brick (baked/unbaked) samples, collected from a large area in and around a rapidly growing Indian city, Agra, reveals approximately similar concentrations in soils and bricks, thereby showing insignificant fractionation of these metals during brick making. Further, metals concentration in the core of bricks remains unaffected by any significant amount of acidic and alkaline rain. Thus, the feasibility of a novel role of bricks as a geochemical monitor of atmospheric heavy metal pollution has been tested. Utilizing this concept, an attempt has also been made to trace the history of atmospheric copper depositions in the soils of Agra during the last 100 years.     

Reactive Compatibilization of Biobased Polyurethane Prepolymer Toughening Polylactide Prepared by Melt Blending

Polylactide (PLA) is a major biodegradable polymer, which has received extensive interests over the past decades and holds great potential to replace several petroleum-based polymeric materials. Nevertheless, the inherent brittleness and low impact strength have restricted its invasion to niche markets. In this paper, the authors demonstrate that the entirely bio-sourced blends, namely PLA and castor oil-based polyurethane prepolymer (COPUP), were first melt-compounded in an effort to prepare novel biodegradable materials with an excellent balance of properties. NCO-terminated COPUP was successfully synthesized and subsequently mixed with variable concentration of PLA matrix using melt-compounded by twin-screw extrusion technique. The miscibility, phase morphology, mechanical properties, and thermal resistance of the blends were investigated. During FTIR analysis, it suggests that the interfacial compatibilization between COPUP and PLA phase occurred by the reaction of –NCO group of MDI with terminal hydroxyl group of PLA. DMA analysis showed that COPUP and PLA showed some limited miscibility with shifted glass transition temperature. The morphologies of fracture surface showed a brittle-to-ductile transition owing by the addition of COPUP. The crystallization behavior was studied by differential scanning calorimeter (DSC). The strain at break and notched impact strength of PLA/COPUP blends were increased more than 112–15.4 times elegant of neat PLA; the increase is superior to previous toughening effect by using petroleum-based tougheners. Furthermore, the thermal resistances and melt flow properties of the materials were also examined by analysis of the melt flow index and heat deflection temperature use in the work. With enhanced toughness, the PLA/COPUP blends could be used as replacements for some traditional petroleum-based polymeric materials.